The magnetic lock is produced based on the principle of electricity and magnetism. It has the better quality and advantages of traditional key locks, and is safer and more practical. So, how to install a magnetic lock correctly? The installation method of the magnetic lock will be described in detail below.
Before installing the magnetic lock, we must make preparations. The first is to prepare a screwdriver. The screwdriver is a tool used to open the magnetic lock cover. Then we use a wrench to open the side plate, so that the preparation work is roughly finished.
During the installation process, a paper box must be used to mark the door and drill holes with an electric drill. The next thing we have to do is to install the magnetic lock with more complicated steps. We must first insert the hexagon socket screw into the iron plate and put the rubber The washer is placed between the two pieces of metal washer, and then set on the hexagon socket screw.
Insert the iron plate into the three holes made on the door, and insert the mushroom head from the other side of the door. Use a hexagonal wrench to lock the iron plate on the door, and then fix the side plate with two round head screws. On the perforated door frame, you must pay attention at this time: do not lock the side plate, so that it can move back and forth to facilitate the correction of the safety position, so that the iron plate and the side plate are fixed, and the next step is to fix the main body of the lock. After fixing the main body of the lock and the side plate to lock the half-round head screws of the side plate, lock all the countersunk screws, then remove the half-round head screws, and drill holes in the appropriate positions for wiring.
Finally, we can proceed with the connection of the installation manual. Finally, cover the cover and insert the small aluminum cylinder into the screw hole of the lock body, so that a strong and safe magnetic lock is installed.